📑 The Lucknow Journal

Live News

28.3°C
  • Lucknow
28.3°C
  • Lucknow
November 18, 2026
Follow Us:
📑 The Lucknow JournalBlogNationalStatesFrom seawater to safe drinking water: Indian scientists add cooling benefit

From seawater to safe drinking water: Indian scientists add cooling benefit

New Delhi, November 18: Indian scientists at BITS Pilani’s Hyderabad campus have developed a patented solar-powered technology that simultaneously converts seawater into potable freshwater and provides cooling, producing up to 12.4 liters of freshwater per hour and delivering 6.57 kW of cooling capacity, offering a promising solution to water scarcity and heat stress in coastal, island, and remote regions of India.

Large desalination plants operate in Minjur and Nemmeli in Chennai. Kavaratti, Agatti, and Minicoy in Lakshadweep also have systems for converting seawater into potable water. BITS’s research adds a new dimension to these efforts, as it incorporates cooling along with water production.

Typically, desalination plants are required to make seawater potable, and air conditioning or other cooling equipment is required to keep the environment cool. Both systems have separate energy consumption. BITS scientists have integrated these processes to develop a system that simultaneously purifies seawater and cools the air.

Professor Sandeep S. Deshmukh of the Department of Mechanical Engineering, who led the research, said, “Our aim was to develop a technology that can produce freshwater from seawater and also meet the cooling needs. Normally, these two tasks require separate systems. We have developed the potential for better energy utilization by integrating both processes. Its solar-powered system could make it useful for coastal and remote areas where access to drinking water and electricity remains a challenge.”

He explained that in this technology, ambient air is first heated and then passed through a humidification unit. During this process, the air absorbs moisture from sea or salt water. The moist air is then cooled, causing the water vapor present in it to condense into water droplets. These droplets are collected to obtain sweet water. The cool, moisture-free air produced during this process can be used for cooling.

The system’s unique feature is its ability to operate in five different operational configurations. These allow for balancing water production and cooling according to weather, atmospheric humidity, and local needs. Multi-stage operation allows for increased production during periods of high drinking water demand, while prioritizing cooling during periods of heat and humidity.

Professor Shantanu Prasad Dutta, who led the research, says, “The key feature of this research is its ability to operate in five different operational configurations. The balance between freshwater production and cooling can be achieved based on weather, atmospheric humidity, and local needs. In laboratory tests, we demonstrated freshwater production of up to 12.4 liters per hour and a cooling capacity of up to 6.57 kilowatts. These results highlight the potential of this integrated technology.”

The researchers developed a laboratory-scale prototype to test the system’s performance in various weather and ambient conditions. In tests, the dual-stage configuration produced up to 12.4 liters per hour of freshwater under high humidity conditions. A maximum cooling capacity of 6.57 kW was demonstrated under various operating conditions. The system output temperature was recorded as low as 14 degrees Celsius.

This prototype was developed with the goal of producing approximately 200 liters of freshwater per day, taking into account Indian climatic conditions. The researchers’ economic assessment revealed a minimum estimated production cost of freshwater of 30 paise per liter. This is a laboratory-based estimate, but it is estimated that the cost would be much lower if used commercially.

According to K. Sai Sandeep, a researcher who contributed to this research, “Our effort in developing this system has been to test its efficiency under real-world conditions. Water is obtained by subjecting air to humidification and condensation processes. The cool, dehumidified air produced during this process can be used for cooling. Through further field testing and technical improvements, it has the potential to be further developed to suit the needs of coastal villages and island regions.”

It is noteworthy that in India, there are many villages and settlements in the vast coastal areas from Gujarat to Maharashtra, Goa, Kerala, Tamil Nadu, Andhra Pradesh, Odisha and West Bengal, where the availability of fresh water remains a challenge. In island areas like Lakshadweep and Andaman-Nicobar, the problem of water supply becomes more serious due to limited natural water sources. In such areas, this solar energy based system can become an option for providing drinking water and cooling facilities at the local level.

Research on integrating seawater desalination and cooling is underway in several countries worldwide. Studies on such technologies were published in “Energy Conversion and Management” in 2020, “Applied Thermal Engineering” in 2023, and the “International Journal of Refrigeration” in 2024. The contributions of BITS researchers have been significant in developing and patenting an integrated system suitable for Indian climatic conditions.

The findings of this research have been published in the prestigious international scientific journal “Applied Thermal Engineering.” The research team is now exploring the possibilities of testing it in various climatic conditions and further development in collaboration with industrial institutions. At the same time, its successful demonstration on a large scale, moving out of the laboratory, will be the next important step towards the practical use of this technology.

Share:

Leave a Comment

Your email address will not be published. Required fields are marked *

Related Post

Tags